What Clock Resets After Power Cut means on your Asko built-in oven (asko oven clock resets)
On most Asko ovens, the clock and time-of-day setting are stored only while power is present, so an asko oven clock resets to a default or flashing state any time the oven is disconnected at the breaker, unplugged, or loses power in an outage — this is normal and matches exactly what the manuals instruct after isolating the oven to clear an Err code. The genuine symptom worth diagnosing is a clock that resets on its own, with no known power interruption, which points at a control board or supply issue rather than normal behavior.

Symptoms
Checking these symptoms against your Asko built-in oven keeps you from chasing the wrong problem, because look-alike problems call for different repairs. A built-in oven can show a single sign or several combined, creeping in gradually or landing suddenly after a surge, a leak, or fresh install work.
- the clock flashes or shows a default time after a known power outage or after the oven was isolated at the breaker
- other saved settings, such as a favorite cook program, may also reset alongside the clock
- the clock resets repeatedly over a short period with no known power interruption
- a brief flicker of the kitchen lights or other appliances may coincide with an unexplained reset
- the oven otherwise operates normally between resets
Common causes
There is rarely a single obvious cause on an Asko built-in oven, so the possibilities below are sorted from probable to unlikely. Testing them in that order tells you whether your built-in oven needs a simple adjustment or a repair with genuine OEM or trusted-supplier parts.
- Normal behavior after a genuine power interruption — most Asko ovens have no battery backup for the clock, so any mains loss resets it
- Loose supply connection — a connection feeding the oven that is not fully secure can cause brief, unnoticed power drops
- Household circuit issue — a shared circuit with a loose breaker connection or another appliance causing brief drops can affect the oven’s clock specifically
- Control board power supply problem — an internal problem on the board itself can cause it to lose memory even without an external interruption
Troubleshooting steps you can try
Run these steps on your Asko built-in oven in the sequence shown before you pick up the phone. If working on the built-in oven would put you near mains wiring, gas, a hot cavity, water, or a sealed system, stop and let a qualified technician take over from there.
- Confirm whether a known power outage, breaker trip, or intentional isolation happened around the time of each reset.
- If resets happen with no known cause, check the oven’s power cord and outlet connection for looseness.
- Note whether other appliances on the same circuit also show signs of brief power interruptions.
- Reset the clock and monitor over a few days to see whether unexplained resets are a one-off or a pattern.
- If the clock keeps resetting with no external power interruption, book a technician to check the board’s power supply.
Parts a technician may replace
When the problem on your Asko built-in oven is hardware-related, a technician inspects, tests, or replaces the control board memory, backup capacitor (if fitted), and low-voltage supply. The exact part for your built-in oven comes from matching model, serial, and Art. No., and confirming the failure first means only what is genuinely broken on the built-in oven gets changed.
When to call a technician
A technician checks the oven’s supply connection and, if that is sound, tests the control board’s internal power supply for a problem causing it to lose memory unexpectedly. Rated Low severity, this condition does not put your Asko built-in oven at immediate risk; still, if Clock Resets After Power Cut persists on the built-in oven after you have worked through the steps, let a technician pin down the cause before replacing anything. We are not affiliated with Asko, Gorenje, or Hisense; your built-in oven is repaired independently by experienced technicians with genuine OEM or trusted-supplier parts and a 30-day labor warranty. Have the model, serial, and Art. No. from your Asko built-in oven ready when you schedule, and the correct component can be matched to your built-in oven beforehand so Clock Resets After Power Cut is resolved in one trip where possible.
Related help and Asko resources
A Clock Resets After Power Cut that keeps coming back on your Asko built-in oven is worth a proper look: book Asko built-in oven repair, scan our other built-in oven error-code guides, use our step-by-step repair guides, schedule service for an appointment, or check your area on our locations page. To look up your Asko built-in oven’s specifications and manuals, see the manufacturer at global.asko.com.