What ERROR_0 means on your Asko dryer (asko dryer error_0)
An asko dryer error_0 problem belongs to the T411VD steam and heat-pump platform, a different generation entirely from the TD70 service platform the L/F/S/J1/LCD codes above belong to. Asko’s own manual labels it a control unit failure and its stated instruction is simply “please call service center” — the manual does not offer a self-help path for this one, unlike several of the other ERROR_ codes on the same platform. Because it names the control unit itself rather than a sensor or a consumable part, it is treated here as the most serious of the five documented T411VD codes.
Symptoms
The indicators below help confirm the problem on your Asko dryer instead of a different issue that mimics it. Your dryer might produce one symptom or a handful at once, whether they develop slowly or appear all at once after a power event, a demanding wash or cook, or recent installation.
- The display shows ERROR_0 or E-0
- The dryer will not start or stops mid-cycle when it appears
- No amount of powering the unit off and on clears it for more than a few minutes
- Other display functions may behave erratically alongside the error
Common causes
The symptoms on your Asko dryer can trace back to more than one root cause, which is why the list runs from most probable to least. Taking them in turn helps you see whether your dryer needs nothing more than a simple check or a proper repair with genuine Asko parts.
- Control board internal problem — a component or circuit on the main board itself has failed
- Wiring failure feeding the control board — a damaged or loose connection can present as a board failure
- Firmware or memory problem — less common, but a corrupted control state can also trigger this alert
Troubleshooting steps you can try
Before service is booked, walk through this checklist on your Asko dryer in order — many problems are resolved without a visit. Whenever a step reaches live voltage, gas, a hot oven cavity, water, or a sealed component on the dryer, that is your cue to call in a technician.
- Power the dryer off at the outlet for a full minute before restarting it.
- Confirm the outlet and circuit are supplying power correctly.
- Avoid repeated power-cycling if ERROR_0 keeps returning — Asko’s own manual does not offer a further self-help step for this code.
- Book service rather than continuing to reset the unit.
Parts a technician may replace
Depending on what the diagnosis turns up, a technician working on your Asko dryer may inspect, test, or replace the main control board and internal wiring. The correct part for your dryer is matched from its model, serial, and Art. No., and genuine OEM or trusted-supplier components go back in rather than generic substitutes, so the dryer keeps its performance and its long service life.
When to call a technician
Asko’s own manual directs a control unit failure straight to service — an experienced technician needs diagnostic access to the T411VD control board to confirm the problem. This is a High-severity condition, so leave your Asko dryer switched off and book service without delay instead of running it again; if the dryer looks, smells, or sounds unsafe, isolate its power or water at the source first. We are an independent service and carry no affiliation with the manufacturer, so your Asko dryer is repaired by experienced technicians with genuine OEM or trusted-supplier parts and a 30-day labor warranty. Booking is quicker if you can read your Asko dryer’s model, serial, and Art. No. off the rating plate first — that lets us match the right part for the dryer up front and clear ERROR_0 without repeat visits.
Related help and Asko resources
If the checks above leave ERROR_0 unresolved on your Asko dryer, book Asko dryer repair, browse our dryer error-code guides, step through our step-by-step repair guides, schedule service whenever it suits, or find local help on our locations page. For a closely related problem on your Asko dryer, see ERROR_4 control unit failure, clean filters. The maker publishes complete specifications and model information for your Asko dryer at us.asko.com.
