- Condenser with heat pump
- 16 programs
The Asko T411HS.W is a current condenser with heat pump tumble dryer. Owners of the T411HS.W usually call about slow drying long before any error code appears, and the cause is almost always a blocked or saturated condenser filter. If the T411HS.W does raise a code, it is read against whichever TD70 board revision this unit carries -- L2-L4, F10/F29/F30, or S1-S9, since the same problem changes its label across revisions.

Reading the T411HS.W correctly starts with knowing which dryer platform it is. The T208V analog condenser family publishes no codes at all and is diagnosed by symptom. The TD70 service platform does report codes, but changes their form across revisions, so a single condensate-tank problem can read L4, F10 or S1. The T411VD steam and heat-pump platform shows ERROR_0 to ERROR_5 instead. Establishing that platform is the first diagnostic step, and whatever the build, restricted airflow — not a failed part — is the leading cause of long drying times. For the T411HS.W, see dryer repair and our dryer error-code guides. Check the T411HS.W's published specification at us.asko.com, and use our Asko repair guides when it is time to act on a problem.