What ERROR_3 means on your Asko dryer (asko dryer error_3)
An asko dryer error_3 problem flags a condensate pump failure on the T411VD platform. Unlike the passive gravity-fed condensate tank on the TD70 platform, the T411VD’s steam and heat-pump design actively pumps condensate out, and ERROR_3 means that pump is not doing its job. Asko’s manual again directs owners to contact service rather than offering a self-clear step, which fits the pattern for this platform’s ERROR_ codes generally — they tend to name genuine component problems rather than routine status conditions.
Symptoms
The indicators below help confirm the problem on your Asko dryer instead of a different issue that mimics it. Your dryer might produce one symptom or a handful at once, whether they develop slowly or appear all at once after a power event, a demanding wash or cook, or recent installation.
- The display shows ERROR_3 or E-3
- Water may be visible pooling near the base of the dryer
- The cycle stops before draining is complete
- A humming or straining sound may be audible if the pump is trying to run but cannot clear the line
Common causes
A single set of symptoms on your Asko dryer can come from any of the causes below, listed with the common ones first. Eliminating them methodically separates the quick checks anyone can make on a dryer from the problems that need trained diagnosis and Asko parts.
- Condensate pump motor failure — the pump itself has stopped working
- Blocked drain line downstream of the pump — a clog prevents the pump from moving water even if it is running
- Debris lodged in the pump housing — lint or sediment can jam the impeller
- Wiring failure to the pump — a damaged connection can stop the pump from receiving power
Troubleshooting steps you can try
Before calling anyone out, run through these checks on your Asko dryer in sequence, as a fair number of problems clear at this stage. Draw the line wherever you feel out of your depth on the dryer, or where mains power, gas, heat, water, or a sealed component comes into play, and let a technician finish.
- Check the floor and base of the dryer for standing water before doing anything else.
- Power the unit off at the outlet if water is present, and avoid running further cycles.
- Inspect any visible portion of the drain line for kinks.
- Contact service — this is a pump component problem, not something that clears with a restart.
Parts a technician may replace
When your Asko dryer shows this problem, a technician will inspect, test, or replace the condensate pump, pump wiring, and drain path as needed. The part is pinned down from your dryer’s model, serial, and Art. No., and only genuine or trusted-supplier parts go into the dryer, so the repair lasts.
When to call a technician
ERROR_3 needs an experienced technician to inspect and, if necessary, replace the condensate pump on your T411VD dryer, along with checking the drain line for blockage. This problem sits at Medium severity, so your Asko dryer is safe to leave for now; if ERROR_3 keeps returning on the dryer despite the steps above, get a technician to establish the cause before ordering parts. Your Asko dryer is handled independently — we have no affiliation with Asko, Gorenje, or Hisense — by experienced technicians using genuine OEM or trusted-supplier parts, with 30 days of labor warranty on the dryer. The Art. No., alongside the model and serial on your Asko dryer, is what lets us order the right part for your dryer before we arrive and put ERROR_3 right without unnecessary return trips.
Related help and Asko resources
If the checks above leave ERROR_3 unresolved on your Asko dryer, book Asko dryer repair, browse our dryer error-code guides, step through our step-by-step repair guides, schedule service whenever it suits, or find local help on our locations page. There is a related write-up for your Asko dryer at ERROR_4 control unit failure, clean filters. Manufacturer specifications and manuals for your Asko dryer can be found at us.asko.com.
