What Excessive Vibration means on your Asko washer (asko washer excessive vibration)
Vibration is a symptom to diagnose, not an Asko error code to look up. Asko’s own manuals describe a normal, self-correcting “Unbalance” or “(Imbalance)” event on several panels, where the drum redistributes the load automatically. Vibration that goes well beyond that brief redistribution, or that shakes the machine across the floor, is not the same thing — it points to a mechanical issue rather than a load that simply needs settling.
Symptoms
What your Asko washer is doing should match the list below if this is genuinely the problem rather than one that only resembles it. The washer may present one symptom or many, sometimes over several cycles and sometimes right after a power cut, a heavy load, or a recent installation.
- The machine shakes or walks across the floor during spin
- Vibration is loud enough to be heard in other rooms
- The washer rocks even with a normal, moderate-sized load
- Vibration is present from the very start of spin, not just briefly
Common causes
The symptoms on your Asko washer can trace back to more than one root cause, which is why the list runs from most probable to least. Taking them in turn helps you see whether your washer needs nothing more than a simple check or a proper repair with genuine Asko parts.
- Shipping bolts not removed — bolts meant to secure the drum for transport were left in place after installation
- Leveling feet not adjusted — the machine is not sitting flat and stable on the floor
- Worn suspension springs or dampers — the components that absorb drum movement have degraded
- Worn drum bearings — internal bearings allow the drum to move more than designed
Troubleshooting steps you can try
Handle these checks on your Asko washer in order, starting with the easiest, before you decide you need help. Break off at once if a step on the washer exposes you to live wiring, gas, a hot oven, standing water, or a sealed system, and leave it to a professional.
- Confirm shipping bolts were removed if this is a newly installed machine.
- Check that all four feet sit flat on the floor and adjust them until the machine does not rock when pushed at each corner.
- Try a normal, moderate-sized load rather than a single bulky item to rule out a genuine imbalance.
- Note whether the vibration is present at low spin speeds too, not just at the fastest stage.
Parts a technician may replace
Where the problem on your Asko washer traces to hardware, a technician inspects, tests, or replaces the suspension springs and dampers, leveling feet, drum bearings, and shipping bolts first. Each is matched to your washer by model, serial, and Art. No., and genuine OEM or trusted-supplier components are used so the washer performs as it should.
When to call a technician
Vibration that continues after leveling and load checks needs an experienced technician to inspect the suspension springs, dampers, and drum bearings on your Asko washer. This problem sits at Medium severity, so your Asko washer is safe to leave for now; if Excessive Vibration keeps returning on the washer despite the steps above, get a technician to establish the cause before ordering parts. Because we operate independently of the manufacturer, your Asko washer is in the hands of experienced technicians using genuine OEM or trusted-supplier parts, and the labor on the washer carries a 30-day warranty. Booking your Asko washer goes smoothest when you have its model, serial, and Art. No. ready, since that pins the exact part for the washer before the visit and shortens how long Excessive Vibration takes to fix.
Related help and Asko resources
If Excessive Vibration has not cleared on your Asko washer, you can book Asko washer repair, browse our washer error-code guides, put our step-by-step repair guides to use, schedule service for service, or locate help on our locations page. The maker publishes complete specifications and model information for your Asko washer at us.asko.com.
