What Over flow problem means on your Asko washer (asko washer over flow problem)
An asko washer over flow problem is a plain-language message on the premium text-label panel fitted to models like the Allergy W6888. The manual instructs owners to shut off the water tap and treats it as connected to the separate “Water outlet problem” message on the same panel, since an overflow often traces back to water not draining fast enough as much as water coming in too fast. This message is the text-panel equivalent of the F10 overfilling code on the W6xxx display panel, but the two are printed differently and belong to different control boards.
Symptoms
To be sure your Asko washer has this problem and not a close relative, line up what you are seeing against the signs below. On the washer these can show up singly or several together, easing in over time or arriving suddenly after an outage, a spill, or a service visit.
- The screen reads “Over flow problem” and the cycle halts
- Water is visible near or above the normal fill line in the drum
- The machine may stop mid-fill rather than mid-wash
- A “Water outlet problem” message may follow shortly after
Common causes
The same symptoms on an Asko washer point to several possible problems, so the causes here start with the most common. Ruling each out in turn shows whether your washer has a quick fix or a problem that needs proper diagnosis and the right parts.
- Water tap not shut off promptly — mains pressure keeps adding water once a fill limit is exceeded
- Drainage restriction backing water up — a slow drain lets water accumulate faster than it clears
- Inlet valve not closing fully — a worn valve seat allows water through even when the fill is complete
- Oversudsing from the wrong detergent — excess foam can be misread as a higher water level
Troubleshooting steps you can try
Attempt the following on your Asko washer step by step before calling out an engineer. Anything on the washer that involves mains power, gas, a hot cavity, water, or a sealed component is where you should stop and bring in a qualified technician.
- Shut off the water supply tap as soon as the message appears.
- Check the drain hose and filter for the same kind of blockage that causes a water outlet problem.
- Confirm detergent dosing matches a high-efficiency washer’s recommended amount.
- Once the tap is off and drain path is clear, restart a short cycle to see whether the problem clears.
Parts a technician may replace
Diagnosis on your Asko washer may lead a technician to inspect, test, or replace the water inlet valve, pressure sensor, and drain path. The failed part is confirmed on the washer before anything is ordered, and only genuine OEM or trusted-supplier parts — matched by model, serial, and Art. No. — go back into the machine.
When to call a technician
An over flow problem that returns after the tap is off and the drain is clear needs an experienced technician to test the inlet valve and pressure sensor on your Asko washer. Rated Medium, this condition is not urgent for your Asko washer — though where Over flow problem persists on the washer after the checks, a technician confirming the problem first will save replacing the wrong component. Repairs to your Asko washer are carried out independently, with no tie to Asko, Gorenje, or Hisense; we use experienced technicians and genuine OEM or trusted-supplier parts, and stand behind the labor on your washer for 30 days. Have the model, serial, and Art. No. from your Asko washer ready when you schedule, and the correct component can be matched to your washer beforehand so Over flow problem is resolved in one trip where possible.
Related help and Asko resources
Should Over flow problem persist on your Asko washer despite the steps above, you can book Asko washer repair, read more of our washer error-code guides, follow our step-by-step repair guides, schedule service for a visit, or locate a technician through our locations page. See also Water outlet problem, which is related to this problem on your Asko washer. For full specifications and model lookup on your Asko washer, the maker’s own details are at us.asko.com.
