- Condenser with heat pump
- 12 programmes
The Asko T308HCW.AU is a current condenser with heat pump tumble dryer. With 12 programs and a 8 kg drum, the T308HCW.AU's slow-drying complaints trace back to a blocked or saturated condenser filter more often than to a failed heating element. Codes here read from the TD70 heat-pump platform's own code set, which relabels the same problems differently on each control-board revision. Asko's US dryer line-up does not include the T308HCW.AU; it is a Australian unit that reaches American service calls through import or an earlier distribution run.
Some Asko dryers talk in codes and some say nothing, so the T308HCW.AU is placed on its platform before anything is read. The analog T208V condenser family is symptom-only. The TD70 service platform reports codes whose form drifts across board revisions — L4, F10 and S1 can all be the same condensate-tank problem. The T411VD steam and heat-pump platform posts ERROR_0 through ERROR_5. Platform first, then the code; and because a choked air path is the usual culprit behind weak drying, that gets checked early. For the T308HCW.AU, see dryer repair and our dryer error-code guides. Full details on the T308HCW.AU — specification and model lookup alike — are published at us.asko.com, and our repair guides translate them into practical steps.
