- Condenser with heat pump
- 20 programmes
- Automatic condenser filter cleaning
The Asko T709HUW.AU is a current condenser with heat pump tumble dryer. This 9 kg condenser with heat pump dryer runs 20 programs, and the most common call on the T709HUW.AU is the condensate pump, once the automatic filter cleaning cycle itself starts failing. When it does raise a code, the T709HUW.AU reports it through the TD70 service-platform codes, which change form across board revisions -- the same condensate-tank problem reads as L4, F10 or S1 depending on which revision is fitted. The automatic condenser-filter cleaning cycle reduces lint calls but does not eliminate them -- the mechanism itself can jam. The T709HUW.AU is a Australian-market unit, not part of Asko's current US catalog, and reaches a US laundry room through earlier distribution or an imported install.
On the T709HUW.AU, the platform decides everything about how a problem surfaces. Analog condenser dryers such as the T208V family show no code and are worked by symptom. TD70 machines are code-bearing, yet the format is revision-dependent — the identical condensate-tank problem appears as L4, then F10, then S1 across successive boards. T411VD steam and heat-pump units run their own ERROR_0 through ERROR_5 scheme. Because of that, we settle the platform before anything else, and we check the air path first, since a restriction is the commonest cause of poor drying. For the T709HUW.AU, see dryer repair and our dryer error-code guides. Look up the T709HUW.AU on us.asko.com for manufacturer specifications, and browse our model directory to compare it with related Asko units.
