- Condenser with heat pump
- 20 programmes
- Automatic condenser filter cleaning
The Asko T709HUG.AU is a current condenser with heat pump tumble dryer. Owners of the T709HUG.AU usually call about slow drying long before any error code appears, and the cause is almost always the condensate pump, once the automatic filter cleaning cycle itself starts failing. If the T709HUG.AU does raise a code, it is read against whichever TD70 board revision this unit carries -- L2-L4, F10/F29/F30, or S1-S9, since the same problem changes its label across revisions. Automatic condenser-filter cleaning cuts down on lint-related calls, though the cleaning mechanism is itself a wear part that can fail. The T709HUG.AU belongs to Asko's Australian laundry range rather than the current US catalog, and a unit like this in an American laundry room has generally arrived through earlier distribution or an imported/spec'd install.
On the T709HUG.AU, the platform decides everything about how a problem surfaces. Analog condenser dryers such as the T208V family show no code and are worked by symptom. TD70 machines are code-bearing, yet the format is revision-dependent — the identical condensate-tank problem appears as L4, then F10, then S1 across successive boards. T411VD steam and heat-pump units run their own ERROR_0 through ERROR_5 scheme. Because of that, we settle the platform before anything else, and we check the air path first, since a restriction is the commonest cause of poor drying. For the T709HUG.AU, see dryer repair and our dryer error-code guides. For the T709HUG.AU's full manufacturer specifications and a model lookup, see us.asko.com, and browse our Asko repair guides and model directory for related help.
