- Condenser with heat pump
- 18 programmes
The Asko T511HPXLG.AU is a current condenser with heat pump tumble dryer. Owners of the T511HPXLG.AU usually call about slow drying long before any error code appears, and the cause is almost always a blocked or saturated condenser filter. If the T511HPXLG.AU does raise a code, it is read against whichever TD70 board revision this unit carries -- L2-L4, F10/F29/F30, or S1-S9, since the same problem changes its label across revisions. The T511HPXLG.AU is a Australian-market unit, not part of Asko's current US catalog, and reaches a US laundry room through earlier distribution or an imported install.
The T511HPXLG.AU belongs to one of several dryer platforms, and that alone determines whether it can show a code. Condenser dryers in the analog T208V family publish none and are read by symptom. TD70 service machines publish codes that change shape by revision, so L4, F10 and S1 may all describe one condensate-tank problem. Steam and heat-pump T411VD machines use ERROR_0 to ERROR_5. We fix the platform first, and treat a restricted air path as the prime suspect whenever drying slows. For the T511HPXLG.AU, see dryer repair and our dryer error-code guides. Verify the T511HPXLG.AU's specification at us.asko.com, then turn to our Asko repair guides and model directory for repair-focused reading.
