- Glass ceramic
- F-series problem display
The Asko HID824GC is a current induction cooktop. A induction cooktop finished in black / black glass sees its control electronics outlast the cooking surface itself; when a repair is needed it is usually the generator's over-temperature cutout triggering because airflow under the unit is restricted, rarely a coil failure itself. The HID824GC reports through codes drawn from the HI1655M generator's F-table, never the E/Er set that a different generator platform uses. Asko's current US site lists zero ovens and zero hobs; the HID824GC belongs to the Australian and UK kitchen range, and a unit installed here has generally come in through import or a specified European build.
Diagnosing the HID824GC starts with a question most guides skip: which control generation is fitted. Asko induction hobs are unusual among the cooking range in publishing real error codes, but they do it in two non-overlapping sets — the F-series list (F00, F0–F6, F7, F8, F9, F99, FA, FAN) and the E-series list (Er03, E2, E3, E5, E6, U400, Er47) — and a code read against the wrong one points a technician at the wrong component. A gas hob publishes no codes at all; there the tell-tales are a burner that clicks without catching or a flame that will not build. Ventilation gets checked first on any induction problem, since the generator throttles or problems when it overheats. For the HID824GC, see cooktop repair and our cooktop error-code guides. When you need the factory numbers for the HID824GC, global.asko.com carries the specifications and model lookup, while our repair guides cover the fixes.
