What FC means on your Asko cooktop (asko cooktop fc)
FC is part of the F-series induction family on the HI1655M and related boards, and the manual lists it alongside F0 through F6 under one shared cause: the ambient temperature is not good. Asko does not give FC a separate explanation from F0-F6 in the manual — it is the same underlying condition, simply displayed with a different label depending on which part of the generator’s self-check detects the issue. The published fix is identical: switch off all heat sources near the cooking plate. Do not assume FC points to a different problem just because the label looks different from a plain digit.
Symptoms
Line the points below up against your Asko cooktop to be confident this is the problem you are dealing with and not a similar one. A cooktop can display a single symptom or several at once, whether they build slowly or appear abruptly after a surge, a spill, or recent installation and testing.
- The display shows the letters FC rather than a numbered F-code.
- FC typically appears under the same conditions as F0-F6 — heat building up around the hob from a nearby appliance.
- Affected zones may not reach or hold the requested power level while FC is showing.
- The code disappears once the area around the hob has cooled.
Common causes
Several separate problems can leave your Asko cooktop showing these symptoms, so the causes below are ordered from the most to the least likely. Working through them in that order on your cooktop tells a quick owner-level check apart from a problem that needs an experienced technician and the right Asko parts.
- Heat from an oven or other appliance below or beside the hob — the same ambient-heat condition documented for F0-F6.
- Blocked ventilation clearance under the cooking plate — trapped heat has nowhere to go.
- Extended high-power cooking in a warm kitchen — combined cooking heat and room temperature push the sensor reading up.
- A generator temperature sensor reading incorrectly — less common, but possible if FC recurs with no heat source nearby.
Troubleshooting steps you can try
Attempt the following on your Asko cooktop step by step before calling out an engineer. Anything on the cooktop that involves mains power, gas, a hot cavity, water, or a sealed component is where you should stop and bring in a qualified technician.
- Switch off any heat-producing appliance installed under or next to the hob.
- Let the hob and surrounding cabinetry cool for several minutes before retrying.
- Confirm the installation clearance under the plate matches the gap specified in the hob’s instructions.
- Avoid running the affected zone at full power immediately after clearing FC; step up gradually.
- Call a technician if FC keeps returning with no nearby heat source and normal ventilation.
Parts a technician may replace
Diagnosis on your Asko cooktop may lead a technician to inspect, test, or replace the generator temperature sensor and surrounding cabinetry ventilation. The failed part is confirmed on the cooktop before anything is ordered, and only genuine OEM or trusted-supplier parts — matched by model, serial, and Art. No. — go back into the machine.
When to call a technician
A technician checks whether FC and F0-F6 alternate on the same unit, which confirms a shared ambient-heat cause rather than treating FC as a separate problem to chase. This is a Low-severity issue, so your Asko cooktop is not in danger — yet FC surviving the checks above on the cooktop deserves a proper diagnosis before a part goes in. We are not affiliated with Asko, Gorenje, or Hisense; your cooktop is repaired independently by experienced technicians with genuine OEM or trusted-supplier parts and a 30-day labor warranty. Before you schedule your Asko cooktop, locate its model, serial, and Art. No. on the rating plate; those three together let the right part be matched to the cooktop in advance and FC sorted in as few trips as possible.
Related help and Asko resources
For a persistent FC on your Asko cooktop, book Asko cooktop repair, read our other cooktop error-code guides, follow the step-by-step repair guides, schedule service whenever works for you, or check your city on our locations page. To look up your Asko cooktop’s specifications and manuals, see the manufacturer at global.asko.com.
